← Back to Guide

Setting Up Your GLORB

First-Time WiFi Connection

iOS Users

📱 Using SNRGY App

  1. Open the SNRGY app and select your device on the start screen
  2. Go to Modes → Connect to WiFi
  3. Wait for the WiFi scan to complete
  4. Choose your network and enter your password
  5. Wait for connection (see Verifying Connection)

Android Users

🤖 Using WLED

  1. When powered on, your GLORB creates its own WiFi access point (AP)
  2. Connect to WLED-AP (or GLORB-AP) in your WiFi list
    • Password: wled1234 (or glorb1234) if prompted
    WLED Access Point
  3. Click "WiFi Settings" in the popup that appears
    • Go to http://4.3.2.1 in a browser if not automatically redirected
    WLED Welcome Screen
  4. Enter your network name (SSID) and password under "Connect to existing network". Press "Save & Connect" and go back to your home network.
    • NOTE: Leave everything else as is, especially do not touch the WiFi sleep settings!
    WLED WiFi Settings
  5. Wait for connection (see Verifying Connection)

Note: We now have an early beta release of our Android app! You can download it here. While the beta app is still in development, you can always access the WLED interface through the SNRGY app or the WLED Native app for the full set of features and controls.

Verifying Connection

iOS Users

📱 Using SNRGY App

  1. Restart the SNRGY app
  2. Select your device and go to Settings (⚙️)
  3. Check for an IP address in info section
    • IP address listed → successful connection
    • No IP address → retry connection process

Android Users

🤖 Using WLED Native App

  1. Your GLORB device should appear in the WLED Native app with a listed IP address
  2. You can also access it through your browser at http://[IP_ADDRESS]

🤖 Using SNRGY App

  1. Restart the SNRGY app
  2. Select your device and go to Settings (⚙️)
  3. Check for an IP address in info section
    • IP address listed → successful connection
    • No IP address → retry connection process

Troubleshooting Connection Issues

⚠️ Common Issues